Jayco Camper Trailer / Expanda Bed End Light & Fan Combo

Supplied by Jayco with their current range of Camper Trailers and Expandas, these Bed End light & fan Combo units can also be used with the older Jayco Camper and Expanda models (previously supplied with a bed end light only).

Made in the USA by Command Electronics, this reading light & 2 speed fan plugs into the 1/4″ (6.4mm) 12V jack in the nearby light unit on Jayco Camper Trailers and Expandas. A fantastic product that will keep you cooler in the bed ends when it counts. The Combo unit has a unique 2 directional mounting system that will attach to a 3/4″ or 1″ bed end support pole. It also includes a long-life thermally protected 12V motor which draws a max of 1.3 Amps.

Features:

• Three mounting clips for 2 different mounting positions
• Two speed fan
• Cord extends up to 2.4m
• On/Off light switch with independent fan switch
• Has a 1/4” (6.4mm) jack to fit into an existing 12V internal light
• Includes a standard globe
• Made in the USA
• Compliant to Australian Standards

Specifications: 

• Height: 250mm
• Width: 145mm
• Power: 12V / 1.3A (Max Power Usage)

Our Comments:

• The 2 speed fan function is quite useful. The higher level can pump out quite a volume of air but is probably too noisy to leave on at night which makes the lower setting practical after bedtime. It can get quite hot in the bed ends, we could have done with one of these on a Camper trip a few years back!
• The unit comes with a standard globe but we can supply LED globes to fit these – See our linked listing on this page.
• You need a jack point to install these – as found on Jayco Expanda and Camper Trailers. They do not plug into a standard electrical socket.

Product Code: 500-00082, 0172029